Fog/Driving Lamp: Service and Repair

OVERHAUL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE FRONT FENDER LINER LH




2. REMOVE FOG LAMP ASSY LH
a. Disengage the claw and the 2 pins, and remove the fog lamp assy LH.




3. REMOVE FOG LAMP BULB
a. Remove the fog lamp bulb as shown in the illustration.

4. REMOVE FOG LAMP LAMP UNIT LH
5. PUT VEHICLE THESE CONDITIONS
6. CHECK FOG LIGHT AIM
7. ADJUST FOG LIGHT AIM