Information Bus
Description and Operation
Testing and Inspection- Initial Inspection and Diagnostic Overview
- Component Tests and General Diagnostics
- Check CAN Bus Line
- Check CAN Bus Line (CAN-H) For Short to +B
- Check CAN Bus Line (CAN-H) For Short to GND
- Check CAN Bus Line (CAN-L) For Short to +B
- Check CAN Bus Line (CAN-L) For Short to GND
- Check CAN Bus Lines For Short Circuit
- Check CAN Main Bus Line For Disconnection
- Steering Sensor Communication Stop Mode
- Yaw Rate Sensor Communication Stop Mode
- Pinout Values and Diagnostic Parameters
- Programming and Relearning
Locations
Diagrams