C1210

DTC C1210 ZERO POINT CALIBRATION OF YAW RATE SENSOR UNDONE

CIRCUIT DESCRIPTION

DTC Detecting Condition:

The brake actuator receives signals from the yaw rate sensor via the CAN communication system. The yaw rate sensor has a built-in deceleration sensor.

If there is trouble in the bus lines between the yaw rate sensor and CAN communication system, the DTC U0123/62 (yaw rate sensor communication trouble) and U0124/95 (deceleration sensor communication trouble) are output.

Wiring Diagram:

Step 1 - 3:

INSPECTION PROCEDURE

HINT: When U0073/94, U0100/65, U0121/94, U0123/62, U0124/95 and/or U0126/63 are output together with C1210/36 and/or C1336/39, inspect and repair the trouble areas indicated by U0073/94, U0100/65, U0121/94, U0123/62, U0124/95 or U0126/63 first.