Instrument Cluster / Carrier: Service and Repair

COMBINATION METER ASSEMBLY

Instrument Panel/Meter (TMC Made):

TMC Made

Instrument Panel/Meter (TMMK Made):

TMMK Made

OVERHAUL

HINT: Installation is in the reverse order of removal.

1. REMOVE INSTRUMENT CLUSTER FINISH PANEL

2. REMOVE COMBINATION METER ASSEMBLY
a. Remove the 2 screws and disengage the 2 clips.
b. Disconnect the connectors and remove the combination meter assembly.

3. REMOVE COMBINATION METER GLASS
a. Reverse the combination meter and remove the 2 screws.
b. Remove the tape.
c. Disengage the 7 claws and remove the combination meter glass.