License Plate Lamp: Service and Repair
LICENSE PLATE LAMP ASSEMBLYREPLACEMENT
HINT: Installation is in the reverse order of removal.
1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
2. REMOVE BACK DOOR OUTSIDE HANDLE
3. REMOVE BACK DOOR LOCK CYLINDER & KEY SET
4. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
5. REMOVE LICENSE PLATE LAMP ASSEMBLY
a. Pull the license plate lamp assembly to the side of vehicle as shown in the illustration and release the claw.
b. Disconnect the connector and remove the license plate lamp assembly.