Hazard Warning Light Circuit

HAZARD WARNING LIGHT CIRCUIT

CIRCUIT DESCRIPTION
The multiplex network body ECU blinks the hazard warning light when a lock/unlock signal is detected from the door control transmitter.

Wiring Diagram:

Step 1:

Step 2:

Step 3:

INSPECTION PROCEDURE

HINT:
- It is possible to set the hazard warning light to OFF so that it does not blink for the answer back operation function.
Confirm that the hazard warning light is not set to OFF and the hazard warning light is operating normally before performing the following inspections.
- Start the inspection from step 1 when using the hand-held tester and start from step 2 when not using the hand-held tester.