Pinout Values and Diagnostic Parameters

TERMINALS OF ECU

Terminals Of Control Module/Pinouts - Instrument Panel Junction Block (Multiplex Network Body ECU) (Part 1):

1. INSTRUMENT PANEL JUNCTION BLOCK (MULTIPLEX NETWORK BODY ECU)

Terminals Of Control Module/Pinouts (Part 2):

a. Disconnect the multiplex network body ECU connector and instrument panel J/B connector.
b. Check the voltage and resistance of each terminal of the wire harness side connector.




c. Reconnect the multiplex network body ECU connector and instrument panel J/B connector.
d. Check the voltage of each terminal of the ECU side connector.