Trunk / Liftgate: Adjustments

ADJUSTMENT

HINT: A bolt without a torque specification is shown in the standard bolt chart.







1. INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY
a. Check that the clearance measurements of areas A to B are within the standard range.




2. ADJUST LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY
a. Remove the luggage compartment door cover.
b. Adjust the door horizontally and vertically by loosening the door side 's hinge bolts.
c. Tighten the door side's hinge bolts after the adjustment.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)




d. Adjust the striker.
1. Remove the rear floor finish plate.
2. Using a hammer and a brass bar, tap the striker to adjust it.

HINT: Adjust the door lock position by moving the striker so that the door striker can enter smoothly.

3. Tighten the 2 bolts after the adjustment.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)