Power Mirror Control System

INSPECTION




1. w/o Memory:
INSPECT OUTER MIRROR SWITCH ASSEMBLY




a. Select "L" on the left/right adjustment switch:
Check the switch resistance.
If the result is not as specified, replace the switch assembly.




b. Select "R" on the left/right adjustment switch:
Check the switch resistance.
If the result is not as specified, replace the switch assembly.




2. w/ Memory:
INSPECT OUTER MIRROR SWITCH ASSEMBLY




a. Check the mirror switch resistance.
If the result is not as specified, replace the switch assembly.




b. Check the left/right adjustment switch resistance.







3. INSPECT THE OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Disconnect the I8 connector.
b. Apply battery voltage and check operation of the mirror face.







4. INSPECT THE OUTER REAR VIEW MIRROR ASSEMBLY RH
a. Disconnect the H8 mirror connector.
b. Apply battery voltage and check operation of the mirror face.







5. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH
a. Disconnect the mirror connector.
b. Apply battery voltage and check operation of the mirror, as shown in the table and illustration.
If the result is not as specified, replace the mirror assembly.







6. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH
a. Disconnect the mirror connector.
b. Apply battery voltage and check operation of the mirror, as shown in the table and illustration.
If the result is not as specified, replace the mirror assembly.