Occupant Classification System

DTC Check

HINT:
- When DTC B1650/32 is detected as a result of troubleshooting for supplemental restraint system, perform troubleshooting for the occupant classification system.
- Since the DTCs for the occupant classification system can only be output clear by the hand-held tester, use the hand-held tester to output/clear the DTCs.

Check the DTCs.




1. Connect the hand-held tester to the DLC3.
2. Turn the ignition switch on (IG).
3. Check the DTCs by following the prompts on the tester screen.

HINT: Refer to the hand-held tester operator's manual for further details.