Transmission Speed Sensor: Service and Repair

SPEED SENSOR (ATM)

REPLACEMENT
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE AIR CLEANER ASSEMBLY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER BRACKET
5. REMOVE AIR CLEANER INLET NO.1





6. REMOVE SPEED SENSOR (NT SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and transmission revolution sensor.





7. REMOVE SPEED SENSOR (NC SENSOR)
a. Disconnect the speed sensor connector.
b. Remove the bolt and transmission revolution sensor.





8. INSTALL SPEED SENSOR (NC SENSOR)
a. Coat an O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)

HINT: Make sure of the manufacturer's name.

c. Connect the speed sensor connector.





9. INSTALL SPEED SENSOR (NT SENSOR)
a. Coat an O-ring with ATF.
b. Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)

HINT: Make sure of the manufacturer's name.

c. Connect the speed sensor connector.
10. INSTALL AIR CLEANER INLET NO.1
11. INSTALL AIR CLEANER BRACKET
12. INSTALL AIR CLEANER HOSE NO.1
13. INSTALL AIR CLEANER ASSEMBLY
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. PERFORM INITIALIZATION
Some systems need initialization when disconnecting the cable from the negative battery terminal.