Horn: Service and Repair
HORN ASSEMBLYREPLACEMENT
1. REMOVE HIGH PITCHED HORN ASSEMBLY
a. Disconnect the connector.
b. Remove the bolt and horn.
2. REMOVE LOW PITCHED HORN ASSEMBLY
a. Disconnect the connector.
b. Remove the bolt and horn.
3. INSTALL HIGH PITCHED HORN ASSEMBLY
a. Place the stay onto the baffle part in the radiator support upper. Then install the horn with the bolt.
Torque: 20 Nm (204 kgf.cm, 15 ft.lbf)
b. Connect the connector.
4. INSTALL LOW PITCHED HORN ASSEMBLY
a. Place the stay onto the baffle part in the radiator support upper. Then install the horn with the bolt.
Torque: 20 Nm (204 kgf.cm, 15 ft.lbf)
b. Connect the connector.