Illuminated Entry System Operation Check

ILLUMINATED ENTRY SYSTEM OPERATION CHECK

a. The light that is lit in the illuminated entry system is explained below.

HINT:
Reference:
Key cylinder light, room light.

b. Turn the ignition switch to OFF, open all the doors, and set the driver door in the lock condition.
c. Unlock the driver door and open any one of the doors, then check that the room light goes on. Close the door and check that the room light goes off in about 15 seconds.
d. Turn the ignition switch to ON and open and close any one of the doors. Check that the room light immediately goes off.
e. Turn ignition switch to OFF.
f. Open and close any one of the doors to light the room light.
Before the room light goes off in about 15 seconds, turn the ignition switch to ON. Check that the room light goes off immediately.

g. Turn ignition switch to OFF.
h. Open and close any one of the doors to light the room light.
Before the light goes off in about 15 seconds, lock the driver door. Check that the light goes off immediately.