Programming and Relearning

Resetting The Power Window Motor In The Initial Position For The Limit Switch

Place the matchmarks on the power window motor and window regulator gear.
(1) Connect the power window motor and power window switch to the wire harness of the vehicle.
(2) Turn the ignition switch ON and operate the power window switch to idle the power window motor in the up side direction for more than 6 rotations or less than 10 rotations (4 seconds or more).
(3) Assemble the power window motor and regulator.

HINT:
- Install the motor when the regulator arm is below the middle point.
- Align the matchmarks on the power window motor and window regulator gear when installing the power window motor.

(4) Assemble the power window regulator and door glass.

HINT:
Never rotate the motor to the down direction until the installation of the window glass is completed.