ABS w/ EBD System

DIAGNOSTIC TROUBLE CODE CHART

NOTE: When removing parts, turn the ignition switch off.

C0200/31-C1238/38:

C1239/39-C1251/51:

HINT:
- Using SST 09843-18040, connect terminals TC and CG of the DLC3.
- If no abnormality is found when inspecting parts, inspect the ECU and ground points for poor contact.
- If a trouble code is displayed during the DTC check, check the circuit listed for that code. For details of each code, turn to the respective "DTC NO" in the DTC Chart.
- When 2 or more DTCs are recorded and the problem is not identified, perform circuit inspection of the other DTCs.

C1271/71-1278/78:

DTC OF SPEED SENSOR CHECK FUNCTION

HINT: The codes in this table are output only in the TEST MODE.