Parking Brake System: Adjustments
PARKING BRAKE SYSTEMADJUSTMENT
1. REMOVE REAR WHEEL
2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (DRUM REAR BRAKE TYPE)
3. ADJUST PARKING BRAKE SHOE CLEARANCE (DISC REAR BRAKE TYPE)
4. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
5. INSPECT PARKING BRAKE LEVER TRAVEL
a. Pull the parking brake lever to the fully applied position, and count the number of clicks.
Parking brake lever travel: 6 - 9 clicks at 196 N (20 kgf, 44.1 ft. lbs.)
6. ADJUST PARKING BRAKE LEVER TRAVEL
a. Remove the rear console box sub-assembly.
b. Loosen the lock nut and turn the adjusting nut until the lever travel turns correct.
c. Tighten the lock nut.
Torque: 5.0 Nm (55 kgf-cm, 44 inch lbs.)
d. Install the rear console box sub-assembly.