Map Light: Testing and Inspection

MAP LAMP ASSEMBLY (W/O SLIDING ROOF)
a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 6, then check that the illumination comes on when switch operation is ON position.







MAP LAMP ASSEMBLY (W/ SLIDING ROOF)
a. Measure the resistance according to the value(s) in the table.
b. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 3, then check that the illumination comes on when switch operation is ON position.