Removal and Installation of Fuel System Parts

REMOVAL AND INSTALLATION OF FUEL SYSTEM PARTS

a. Follow the guidelines below regarding the work area.
1. Work in a place with good air ventilation that does not have welders, grinders, drills, electric motors, stoves, or any other ignition sources.
2. Never work in a pit or near a pit as vaporized fuel will collect in those places.

b. Prepare a fire extinguisher before starting work.
c. To prevent static electricity, install a ground on the fuel changer, vehicle and fuel tank, and do not spray the area with water. Be careful when performing work in this area, as the work surface will become slippery. Do not clean up gasoline spills with water, as this may cause the gasoline to spread and cause a fire hazard.
d. Avoid using electric motors, work lights and other electric equipment that can cause sparks or high temperatures.
e. Avoid using iron hammers as they may create sparks.
f. Dispose of fuel-contaminated separately using a fire resistant container.