On-Vehicle Inspection

ON-VEHICLE INSPECTION

1. CHECK BASIC FUNCTION (MANUAL OPERATION FUNCTION)
a. Turn the ignition switch ON.
1. Check that a door glass moves up when its respective window switch of the regulator master switch assembly is pulled up, and moves down when its respective window switch is pushed down.
2. Check that a door glass moves up when the window switch of each regulator switch assembly is pulled, and moves down when each window switch is pushed down.
3. Check that only the driver's door glass can operate when the window lock switch is pressed.

2. CHECK AUTOMATIC OPERATION FUNCTION
a. Turn the ignition switch ON.
1. Check that a door glass is fully opened when each window switch of the regulator master switch assembly is fully pressed DOWN.
2. Check that a door glass is fully opened when the window switch of each regulator switch assembly is fully pressed DOWN.
3. Check that the door glass stops when the applicable switch is turned UP during the AUTO DOWN operation.(However, if the switch is kept on the UP side, the window will change to the manual operation.)