Navigation System

DIAGNOSTIC TROUBLE CODE CHART




1. RADIO AND PLAYER WITH DISPLAY [Navigation receiver assembly] (Physical address: 140)

HINT:
- *1: Even if no failure is detected, this code may be stored depending on the battery condition or voltage for starting an engine.
- *2: This code is stored when 180 sec. have passed since the power supply connector was pulled out after engine started.
- *3: This code may be stored when the engine key is turned again after engine start.
- *4: This code may be stored when the engine key is turned again 1 min. after engine start.




a. Logical address: 01 (Communication control)




b. Logical address: 21 (Switch)




c. Logical address: 34 (Front passenger monitor)







d. Logical address: 58 (Navigation)