Vehicle Stability Control System

DIAGNOSTIC TROUBLE CODE CHART

C0200/31-C1224/44:

C1225/25-C1381/97:

HINT: If a malfunction code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the respective "DTC No." in the DTC chart.

- *1:
a. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
b. Clear the DTC.

- *2:
a. Keep the vehicle in a stationary condition for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
b. Drive the vehicle at a speed of 31 mph (50 km/h). Then depress the brake pedal strongly for about 3 seconds.
c. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
d. Clear the DTC.

HINT:
- In some cases, the intelligent tester cannot be used when ABS warning light remains on.
- In some cases, the intelligent tester cannot be used when the VSC warning light remains on.

C1271/71-C0371/71:

DTC of sensor check function

HINT: The code in this table are output only in TEST MODE.