Rust Resistant
Rust-Resistant Body1. General
Rust-resistant performance is increased by using anti-corrosion sheet steel and anti-corrosion treatment by applying wax, sealer, anti-chipping, etc. to easily corroded parts such as the hood, doors, rocker panels, etc.
2. Anti-Corrosion Sheet Steel
Anti-corrosion sheet steel is used in all areas other than the roof and interior parts.
3. Wax and Sealer
Wax and sealer are applied to hemmed portions of the hood, door panels, hinge and etc. to improve rust-resistant performance.
4. Under Coat
PVC (Polyvinyl Chloride) is applied to underside of the body. A thick coating to improve rust resistant performance is applied to the rear wheel house, the fender apron and other parts which are subject to damage by flying stones, etc.
5. Anti-Chipping Application
Anti-chipping paint is applied to the front and rear wheel arches and the urethane coating is applied to the lower door panel area to protect them from flying stones. In addition, soft-chip primer is applied to the hood, and film injected rocker molding is newly adopted.