Fog/Driving Lamp: Service and Repair

FOG LIGHT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE FRONT FENDER LINER LH




2. REMOVE FOG LIGHT ASSEMBLY LH
a. Disengage the claw and the 2 pins, and remove the fog light assembly LH.




3. REMOVE FOG LIGHT BULB
a. Remove the fog light bulb as shown in the illustration.

4. REMOVE FOG LIGHT UNIT LH

INSTALLATION

1. INSTALL FOG LIGHT UNIT LH
2. INSTALL FOG LIGHT BULB
3. INSTALL FOG LIGHT ASSEMBLY LH
4. INSTALL FRONT FENDER LINER LH
5. PUT VEHICLE THESE CONDITIONS
6. CHECK FOG LIGHT AIM
7. ADJUST FOG LIGHT AIM