Headlamp: Service and Repair

Headlight Assembly:

HEADLIGHT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE RADIATOR GRILLE SUB-ASSEMBLY
2. REMOVE FRONT FENDER LINER LH
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT BUMPER COVER
5. REMOVE LH HEADLIGHT ASSEMBLY




a. Remove the 2 bolts, screw and the clip.
b. Disconnect the connectors, and remove the LH headlight assembly.

6. REMOVE NO.1 HEADLIGHT BULB




a. Remove the headlight, No.1 bulb as shown in the illustration.

7. REMOVE NO.2 HEADLIGHT BULB




a. Remove the headlight, No.2 bulb as shown in the illustration.

8. REMOVE FRONT TURN SIGNAL LIGHT BULB




a. Remove the front turn signal light socket as shown in the illustration.
b. Remove the turn signal light bulb from the front turn signal light socket.

9. REMOVE FRONT TURN SIGNAL LIGHT SOCKET
10. REMOVE HEADLIGHT SOCKET COVER
11. REMOVE HEADLIGHT UNIT LH

INSTALLATION

1. INSTALL HEADLIGHT UNIT LH
2. INSTALL HEADLIGHT SOCKET COVER
3. INSTALL FRONT TURN SIGNAL LIGHT BULB
4. INSTALL FRONT TURN SIGNAL LIGHT SOCKET
5. INSTALL NO.2 HEADLIGHT BULB
6. INSTALL NO.1 HEADLIGHT BULB
7. INSTALL LH HEADLIGHT ASSEMBLY
8. INSTALL FRONT BUMPER COVER
9. INSTALL FRONT FENDER LINER RH
10. INSTALL FRONT FENDER LINER LH
11. INSTALL RADIATOR GRILLE SUB-ASSEMBLY
12. HEADLIGHT AIM ONLY