Tail Lamp: Service and Repair

REAR COMBINATION LIGHT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Installation is in the reverse order of removal.

1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH




a. Disconnect the connector, and remove the 4 nuts.




b. Disengage the pin, and remove the rear combination light assembly LH as shown in the illustration.

2. REMOVE REAR COMBINATION LIGHT BODY GASKET LH




3. REMOVE REAR COMBINATION LIGHT BULB
a. Remove the 3 rear combination light sockets as shown in the illustration.
b. Remove the 3 rear combination light bulbs from the 3 rear combination light sockets.

4. REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

INSTALLATION

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
2. INSTALL REAR COMBINATION LIGHT BULB
3. INSTALL REAR COMBINATION LIGHT BODY GASKET LH
4. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH