Vehicle Stability Control System (for ADVICS Made)

DIAGNOSTIC TROUBLE CODE CHART

- If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the respective "DTC No." in the DTC chart.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table.

C0200/31-C1235/35:

C1236/36-U0124/95:

DTC chart of ABS

(*1, *2):
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed:
- (*1):
a. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
b. Clear the DTC.

- (*2):
a. Keep the vehicle stationary for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
b. Drive the vehicle at the vehicle speed of 31 mph (50 km/h) and keep depressing the brake pedal strongly for approximately 3 seconds.
c. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
d. Clear the DTC.

HINT: In some cases, the intelligent tester cannot be used when the ABS warning light remains on.

43-U0100/65:

U0123/62-U0126/63:

DTC chart of VSC

HINT: In some cases, the intelligent tester cannot be used when the VSC warning light (models without multi information display) or multi information display (models with multi information display) remains on.

C1271/71-C1281/81:

Test Mode DTC of ABS:

C0371/71:

Test Mode DTC of VSC