Vehicle Stability Control System (for BOSCH Made)

DIAGNOSTIC TROUBLE CODE CHART

- If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, refer to the respective "DTC No." in the DTC chart.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table given.

C0200/31-C1228/28:

C1237/37-C1332/38:

C1333/39-U0073/94:

DTC chart of ABS:

(*1, *2):
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed:

- (*1):
a. Drive the vehicle at 12 mph (20 km/h) for 30 seconds or more and check that the ABS warning light goes off.
b. Clear the DTC.

- (*2):
a. Keep the vehicle stationary for 5 seconds or more and depress the brake pedal lightly 2 or 3 times.
b. Drive the vehicle at the vehicle speed of 31 mph (50 km/h) and keep depressing the brake pedal strongly for approximately 3 seconds.
c. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
d. Clear the DTC.

HINT: In some cases, the intelligent tester cannot be used when the ABS warning light remains on.

43-U0126/63:

DTC chart of VSC: