Freeze Frame Data

FREEZE FRAME DATA

a. Whenever an ABS DTC is detected, the skid control ECU stores the current vehicle (sensor) state as Freeze Frame Data.

The skid control ECU stores the number of times (maximum: 31) the ignition switch has been turned from off to on (IG) since the last time the ABS was activated.

HINT:
- However, if the vehicle is stopped or at a low speed (4.3 mph (7 km/h) or less), or if a DTC detected, the skid control ECU will stop counting the number.
- Freeze Frame Data at the time the ABS operates:
The skid control ECU stores and updates data whenever the ABS system operates. When the ECU stores data at the time a DTC detected, the data stored during ABS operation erased.

- Freeze Frame Data at the time a DTC is detected:
When the skid control ECU stores data at the time a DTC is detected, no updates will be performed until the data is cleared.

b. Connect the intelligent tester to the DLC3.
c. Turn the ignition switch on (IG).
d. Select the "DTC INFO" on the tester display.

Part 1:

Part 2:

e. On the DTC data display screen, select the DTC data display with "*".