Hood Sensor/Switch (For Alarm): Service and Repair

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)
2. REMOVE FRONT BUMPER ASSEMBLY (W/O Fog Light)
3. REMOVE FRONT BUMPER ASSEMBLY (W/ Fog Light)
4. REMOVE HIGH PITCHED HORN ASSEMBLY
5. REMOVE HOOD LOCK ASSEMBLY
6. REMOVE HOOD LOCK TENSION SPRING A (for TMMK Made)




a. Remove tension spring A.

7. REMOVE HOOD LOCK TENSION SPRING B (for TMMK Made)




a. Remove tension spring B.

8. REMOVE ENGINE HOOD COURTESY SWITCH (for TMMK Made)




a. Remove the 2 screws and the engine hood courtesy switch.

INSTALLATION

1. INSTALL ENGINE HOOD COURTESY SWITCH (for TMMK Made)




a. Install the engine hood courtesy switch with the 2 screws

2. INSTALL HOOD LOCK TENSION SPRING B (for TMMK Made)




a. Install tension spring B.

3. INSTALL HOOD LOCK TENSION SPRING A (for TMMK Made)




a. Install tension spring A.

4. INSTALL HOOD LOCK ASSEMBLY
5. INSTALL HIGH PITCHED HORN ASSEMBLY
6. INSTALL FRONT BUMPER ASSEMBLY (W/O Fog Light)
7. INSTALL FRONT BUMPER ASSEMBLY (W/ Fog Light)
8. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)