Fuel Gauge Sender: Service and Repair

3MZ-FE Fuel Sender Gauge Assembly:

3MZ-FE Fuel Sender Gauge Assembly

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Coupe)
4. REMOVE REAR SEAT CUSHION ASSEMBLY (for Convertible)
5. REMOVE REAR FLOOR SERVICE HOLE COVER
6. SEPARATE FUEL PUMP TUBE SUB-ASSEMBLY
7. REMOVE FUEL TANK VENT TUBE SET PLATE
8. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
9. REMOVE FUEL SENDER GAUGE ASSEMBLY

INSTALLATION

1. INSTALL FUEL SENDER GAUGE ASSEMBLY
2. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
3. INSTALL FUEL TANK VENT TUBE SET PLATE
4. CONNECT FUEL PUMP TUBE SUB-ASSEMBLY
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.

7. INSPECT FOR FUEL LEAK
8. INSTALL REAR FLOOR SERVICE HOLE COVER
9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Coupe)
10. INSTALL REAR SEAT CUSHION ASSEMBLY (for Convertible)