Rust Resistant
Rust-Resistant Body1. General
Rust-resistance performance is enhanced by extensive use of anti-corrosion sheet steel, as well as by an anti-corrosion treatment which includes the application of anti-rust wax, sealer and anti-chipping paint to easily corroded parts such as the hood, doors and rocker panels.
2. Anti-corrosion Sheet Steel
Anti-corrosion sheet steel is used in all areas other than the roof and interior parts.
3. Wax and Sealer
Wax and sealer are applied to hemmed portions of the hood, door panels, hinge and etc. to improve rust-resistance performance.
4. Under Coat
PVC (Polyvinyl Chloride) is applied to the underside of the body. A thick coating to improve rust resistance performance is applied to the rear wheel wells, the fender aprons and other areas which are subject to damage by flying stones, etc.
5. Anti-chipping Application
Anti-chipping paint is applied to the front and rear wheel arches and a urethane coating is applied to the lower door panel area to protect these areas from flying stones. In addition, soft-chip primer is applied to the hood, and film injected rocker molding is used.