How To Proceed With Troubleshooting

SLIDING ROOF / CONVERTIBLE: SLIDING ROOF SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use these procedure to troubleshoot the sliding roof system.
- *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.

2. CUSTOMER PROBLEM ANALYSIS
HINT:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
- The following 5 items are important points in the problem analysis:





NEXT -- Continue to next step.

3. INSPECT BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
NEXT -- Continue to next step.

4. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
(a) Using the Techstream, check if the CAN communication system is functioning normally.
Result:





B -- GO TO CAN COMMUNICATION SYSTEM
A -- Continue to next step.

5. CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
(a) Using the Techstream, check if the LIN communication system is functioning normally Initial Inspection and Diagnostic Overview.
Result:





B -- GO TO LIN COMMUNICATION SYSTEM
A -- Continue to next step.

6. CHECK FOR DTC (SLIDING ROOF ECU)*
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(b) Recheck for DTCs.
Result:





B -- GO TO DIAGNOSTIC TROUBLE CODE CHART
A -- Continue to next step.

7. PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table Problem Symptoms Table.
Result:





B -- GO TO STEP 9
A -- Continue to next step.

8. OVERALL ANALYSIS AND TROUBLESHOOTING
(a) Operation Check Operation Check
(b) Terminals of ECU Pinout Values and Diagnostic Parameters
(c) Data List / Active Test Scan Tool Testing and Procedures
NEXT -- Continue to next step.

9. REPAIR OR REPLACE
NEXT -- Continue to next step.

10. CONFIRMATION TEST
NEXT -- END