Air Conditioning Control Panel Circuit

HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for Manual Air Conditioning System): Air Conditioning Control Panel Circuit

Air Conditioning Control Panel Circuit

DESCRIPTION

This circuit consists of the air conditioning control assembly and the A/C amplifier. When the air conditioning control assembly is operated, signals are transmitted to the A/C amplifier through the LIN communication system.
If the LIN communication system malfunctions, the A/C amplifier does not operate even if the air conditioning control assembly is operated.

WIRING DIAGRAM





INSPECTION PROCEDURE
NOTICE: Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL ASSEMBLY - BODY GROUND)




(a) Disconnect the air conditioning control assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (AIR CONDITIONING CONTROL ASSEMBLY - BATTERY)




(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - AIR CONDITIONING CONTROL ASSEMBLY)




(a) Disconnect the A/C amplifier connector.




(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

4. INSPECT AIR CONDITIONING CONTROL ASSEMBLY
(a) Replace the air conditioning control assembly Removal.
HINT: Since the air conditioning control assembly cannot be inspected while it is removed from the vehicle, replace the air conditioning control assembly with a new or a known good one and check that the condition returns to normal.
(b) Operate the air conditioning control assembly to check that it functions properly.
Result:





B -- REPLACE AIR CONDITIONING CONTROL ASSEMBLY
A -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE