Fail-Safe Chart

LIGHTING (EXT): LIGHTING SYSTEM: FAIL-SAFE CHART

FAIL-SAFE CHART

1. HID Headlight System
The light control ECU sub-assembly operates in fail-safe mode if an abnormal condition such as those listed below has been detected.





2. Automatic Headlight Beam Level Control System
(a) The headlight leveling ECU assembly operates in fail-safe mode if an abnormal condition such as those listed below has been detected, and keep the last high beam status.





3. Automatic Light Control System
If the main body ECU (driver side junction block assembly) detects a malfunction in the automatic light control sensor, the main body ECU (driver side junction block assembly) effects fail-safe control to prohibit the automatic light control. If the low beam headlights and taillights are on, the lights will remain on until the light control switch is turned off.
4. Automatic High Beam System
(a) The main body ECU (driver side junction block assembly) operates in the fail-safe mode if an abnormal condition such as those listed below has been detected.