Installation

2GR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR





(a) Install a new gasket onto the engine coolant temperature sensor.
(b) Install the engine coolant temperature sensor.
Torque: 20 Nm (204 kgf-cm, 15ft-lbf)
(c) Connect the engine coolant temperature sensor connector.
2. INSTALL AIR CLEANER CASE Installation
3. INSTALL AIR CLEANER CAP WITH HOSE Installation
4. ADD ENGINE COOLANT Service and Repair
5. INSPECT FOR COOLANT LEAK Testing and Inspection
6. INSTALL V-BANK COVER SUB-ASSEMBLY Installation
7. INSTALL NO. 2 ENGINE UNDER COVER
8. INSTALL NO. 1 ENGINE UNDER COVER