Removal

2GR-FE ENGINE CONTROL: ECM: REMOVAL

REMOVAL
NOTICE: Perform the Vehicle Identification Number (VIN) registration when replace the ECM Repair Instruction - Initialization.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
3. REMOVE ECM

(a) Disconnect the 2 ECM connectors and remove the ECM with the brackets.
NOTICE: After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting part of the connectors.
(1) Push in the locks on the 2 levers, raise the levers, and disconnect the 2 ECM connectors.

(b) Remove the 3 nuts and separate the ECM with the brackets.