Installation

2GR-FE STARTING: ENGINE SWITCH: INSTALLATION

INSTALLATION

1. INSTALL ENGINE SWITCH





(a) Attach the 2 claws to install the engine switch.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY





(a) Connect the connector.
(b) Engage the 4 claws to install the lower instrument panel finish panel assembly.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation
4. INSTALL UPPER STEERING COLUMN COVER Installation
5. INSTALL LOWER STEERING COLUMN COVER Installation
6. INSTALL CONSOLE BOX SUB-ASSEMBLY Installation
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
8. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
9. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
11. INSTALL FRONT DOOR SCUFF PLATE RH Installation
12. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Installation
13. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
14. INSTALL FRONT DOOR SCUFF PLATE LH Installation
15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY Installation
16. INSTALL CONSOLE BOX ASSEMBLY Installation
17. INSTALL NO. 2 CONSOLE BOX CARPET Installation
18. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Seat Heater System) Installation
19. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Seat Heater System) Installation
20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.