Seat Position Sensor: Testing and Inspection

SUPPLEMENTAL RESTRAINT SYSTEMS: SEAT POSITION SENSOR: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION
CAUTION: Be sure to follow the correct removal and installation procedures of the seat position sensor.

1. INSPECT SEAT POSITION SENSOR (VEHICLE NOT INVOLVED IN COLLISION)
(a) Perform a diagnostic system check DTC Check / Clear.
2. INSPECT SEAT POSITION SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
(a) Perform a diagnostic system check DTC Check / Clear.
(b) Visually check for defects with the seat position sensor installed on the vehicle.
(1) The defects are as follows:

- Cracks on the sensor housing
- Dents on the sensor housing
- Chips on the sensor housing
- Cracks or other damage to the connector

OK:
No defects are found.
HINT: If any of the defects is found, replace the seat position sensor with a new one.