P0575

CRUISE CONTROL: CRUISE CONTROL SYSTEM: P0575: Cruise Control Input Circuit
P0575 - Cruise Control Input Circuit

DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.





HINT
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function activates and remains on until the ignition switch is turned off.

INSPECTION PROCEDURE

PROCEDURE

1. READ OUTPUT DTC (P0575)

(a) Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

(b) Connect the cable to the negative (-) battery terminal.

(c) Connect the Techstream to the DLC3.

(d) Turn the ignition switch to ON.

(e) Turn the Techstream on.

(f) Enter the following menus: Powertrain / Cruise Control / DTC.

(g) Read the DTCs.

Result:





C -- REPLACE ECM Removal

B -- REPLACE ECM Removal

A -- USE SIMULATION METHOD TO CHECK Electronic Circuit Inspection Procedure