Fuel Gauge Sender: Testing and Inspection

2AZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSPECTION

1. INSPECT FUEL SENDER GAUGE ASSEMBLY (for 2WD)

(a) Check that the float moves smoothly between F and E.

(b) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.





Standard Resistance:





If the value is not as specified, replace the fuel sender gauge assembly.

2. INSPECT FUEL SENDER GAUGE ASSEMBLY (for 4WD)

(a) Check that the float moves smoothly between F and E.

(b) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.





Standard Resistance:





If the value is not as specified, replace the fuel sender gauge assembly.

3. REMOVE FUEL SENDER GAGE RH ASSEMBLY

(a) Check that the float moves smoothly between F and E.

(b) Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.





Standard Resistance:





If the value is not as specified, replace the fuel sender gauge RH assembly.