Readiness Code Reading

Readiness Code, displaying

Special tools, testers, measuring instruments and auxiliary items required
- VAG 1551/1552 Scan Tool with VAG 1551/3 adaptor cable

Work sequence
- Connect VAG 1551/1552 Scan Tool, [1][2][3]Reading and Clearing Diagnostic Trouble Codes
- Switch ON ignition
- Press 0 and 1 buttons to select Address word 01 "Engine electronics"

Display will appear as shown


Rapid data transfer HELP
Select Function XX


- Press 0 and 8 buttons to select Function 08 "Read measuring value block"
- Press Q button to enter input

Display will appear as shown


Read measuring value block HELP
Input display group number XXX


- Press 0, 8 and 6 buttons to show "Display group 86"
- Press Q button to enter input

Display will appear as shown (1 to 4 Display zones)


Read measuring value block 86 ->
1 2 3 4


- Check the Readiness Code in display zone 1
- Specification: 00000000

- Press -> button.

Display will appear as shown


Rapid data transfer HELP
Select Function XX


- Press 0 and 6 buttons to select Function 06 "End data transfer" Function and confirm input with the Q button.

If specification not obtained:
- Generate Readiness Code.

Significance of 8 digit number block for Readiness Code