Cooling System Components - Body Side, Removing and Installing

Cooling system components - body side, removing and installing
1. Radiator
^ With drain plug
^ After replacing replace entire amount of engine coolant
^ With ATF cooler on vehicles with automatic transmission
2. 10 Nm
3. Transmission oil line
4. To coolant pump -V36
5. Left coolant pipe
^ On left longitudinal member
6. Transmission oil line
7. Coolant hose
^ Check for secure seating
8. Non-return valve
^ Note installation position
9. Coolant hose
^ Check for secure seating
10. Securing rubber
11. Securing pin
12. Retainer
^ For air conditioning condenser
13. 10 Nm
14. Air deflector plate
15. Upper coolant hose
^ To coolant regulator housing
^ Secured to radiator and thermostat housing with a retaining clip
^ Check for secure seating
16. Retaining clip
^ Check for secure seating
17. Engine Coolant Temperature (ECT) sensor (on radiator)-G83
^ If necessary release pressure in cooling system before removing
18. Lower coolant hose
^ To upper coolant hose,item 38
^ Secured to radiator with a retaining clip
^ Check for secure seating
19. Rubber mounting