Cylinder Block Assembly: Description and Operation

General Repair Information

• If large quantities of metal particles or abraded material are detected during engine repairs, it may be an indication of a damaged crankshaft or rod bearings. To prevent further damage, perform the following steps after the repair:

• Carefully clean the oil passages.

• Replace the oil injection jets.

• Replace the oil cooler.

• Replace the oil filter.

CAUTION!
Due to the factory coating on the cylinder walls, it is imperative the cylinders are NOT honed during any repair!

• Repairs on the clutch.

• Before removing the crankshaft, prepare for appropriate storage so that sensor wheel does not make contact or become damaged.

• The engine is to be secured to the engine and transmission holder (VAS 6095) for performing assembly work.