Seat Belt Arming and Disarming: Service and Repair
Airbags Safety Precautions
CAUTION!
• Testing, removing, installing and repair work may only be performed by qualified personnel.
• When working on the airbag system, the battery Ground (GND) strap must be disconnected. No waiting time is necessary after disconnecting battery. When connecting the airbag system to a voltage source, there must be no person present inside the vehicle.
• Before picking up (touching) the airbag module, the mechanic/technician must electrostatically discharge him/herself. This is achieved by touching a suitable metal part, for example, a water pipe, heater pipe or metal frame.
• Airbag modules should be installed immediately upon removal from shipping package.
• Airbag modules is to be returned to shipping package when there is an interruption in work.
• It is not acceptable to leave airbag module unattended.
• Airbag modules which have been removed should be stored so that padded side is facing up.
• Airbag modules that have fallen onto a hard surface or show signs of damage must not be installed in vehicle.