Headlamp Washer Spray Nozzle: Adjustments

Headlamp Washer System, Checking and Adjusting Nozzles

Special tools, testers and auxiliary items required

• Adjustment device (T10167)






Nozzle setting dimensions for right headlamp (left headlamp is arranged symmetrically)






Checking Spray Nozzle Adjustment:

- Turn on the low beam.

- Operate the windshield washer.

The headlamps are washed when windshield washer lever is held in "wipe position" at least 1.5 seconds.

The spray should hit the center of the headlamp lens, see - B - and - C -.

Adjusting Nozzles:

- Turn on the low beam.

- Operate the windshield washer.

The headlamps are washed when windshield washer lever is held in "wipe position" at least 1.5 seconds.

Spray nozzles - arrow - are driven outward.






- Perform the following:






- Adjust spray direction of nozzle using adjustment tool (T10167) or adjustment tool (3019A) at upper edge of headlamp, position - B -and - C - out.

• In cases where contamination in spray jet results in an uneven spray pattern, remove the spray jet and rinse it with water in the opposite direction of the spray flow. Subsequently blowing through in the opposite direction of the spray flow with compressed air is permitted. Do not use any other objects to clean the spray nozzles.