Instrument Cluster / Carrier: Testing and Inspection

Instrument Cluster, Adapting

Work procedure "replace instrument cluster" contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module (J285) must be adjusted to the various equipment characteristics and corresponding version for that country.

• To adapt the integrated Anti-Theft Immobilizer Control Module (J362) to the Engine Control Module (ECM) (J623), data from the ECM must be saved in the replacement instrument cluster.

• Also, an adaptation of all vehicle keys must be performed after installing a new instrument cluster.

Special tools, testers and auxiliary items required

• Vehicle tester (VAS 5051A)

• Diagnostic cable (VAS 5051/6A)

Procedure

- Connect the (VAS 5051A).

- Select "Guided Fault Finding" on the (VAS 5051A).

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) Capable Systems

• Instrument Cluster

• Instrument Cluster Functions

• Instrument Cluster, Adaptation/Replacing