Operation CHARM: Car repair manuals for everyone.

Bendix

Cold start Injector
Between the injector pins 10 ohms

Coolant Temperature Sensor
At 14 deg. F. (-10 deg C) 8260 - 10560 ohms
At 32 deg. F. (0 deg. C.) 5800 - 6000 ohms
At 104 deg. F. (40 deg. C.) 1050 - 1200 ohms
At 176 deg. F. (80 deg. C.) 290 - 364 ohms

Fuel Injector
Between the injector pins 14 ohms

Idle Air Valve
Between terminals Approx. 4 ohms

Intake Air Temperature Sensor
At -40 deg. F. (-40 deg C) Approx. 45'000 ohms
At -4 deg. F. (-20 deg C) Approx. 15'000 ohms
At 32 deg. F. (0 deg C) Approx. 5'800 ohms
At 68 deg. F. (20 deg C) Approx. 2'500 ohms
At 176 deg. F. (80 deg C) Approx. 330 ohms

Intake Manifold Pressure Sensor
Signal approx 4.4 Volts at 100 kPa
Signal approx 3.2 Volts at 80 kPa
Signal approx 2.1 Volts at 60 kPa
Signal approx 1.1 Volts at 40 kPa
Signal approx 0.5 Volts at 20 kPa

Oxygen Sensor (Lambda Sond)
Preheat Resistor Cold (less than 68 deg. F./20 deg. C.) 3 ohms
Preheat Resistor Hot (greater than 662 deg. F./350 deg. C.) 13 ohms

Timing [1]
At idle (775) 10° BTDC

[1] Timing spec. is check only, no adjustments are possible.