40000 MI or 64000 KM
ResetService Reminder Indicators
Service Indicator Reminder Lamp (SIR); 1996 Models must use a Scan Tool to reset SIR
Clean
Antenna
Check
Cooling System
Pressure test cooling system.
Brakes and Traction Control
Check thickness of pads & linings, check condition of hoses & lines, check power booster, check parking brake cables & adjust.
Adjust
Throttle Valve Cable/Linkage, A/T
Clutch Pedal Assembly
Clutch Pedal Free Play.
Inspect
Wiper and Washer Systems
Universal Joint, Drive/Propeller Shaft
Steering and Suspension
Power Steering Fluid
Lighting and Horns
Fuel Supply Line
Fluid - M/T
Fluid - Differential
Fluid - A/T
Exhaust System
Drive Belt
1995 940
Coolant
Body and Frame
1992-93; Visually check for corrosion.
Battery
Check charge.
Accessories and Optional Equipment
Replace
Timing Belt Tensioner
�1mINSTALL�0m Torsion Damper: 1992 960 B6304F only; Inspect for label on timing cover, if label is attached and Torsion Damper has already been installed, service is not needed. �1mImportant Note:�0m A Torsion Damper on the exhaust camshaft has been introduced on the �1m1993�0m model year 960 with B6304F engine to extend the replacement interval of the timing belt to 30,000 mile intervals. For a �1m1992�0m model year 960 an exhaust camshaft damper will be installed in conjunction with the the timing belt replacement at the 40,000 mile service. If the torsion damper has not been installed it is highly recommended to have one installed which will change the replacement interval from 20,000 miles to a 30,000 mile interval.
Timing Belt
�1m1992�0m 960 B6304F only - in combination with installation of camshaft Torsion Damper. Inspect for label on timing cover, if label is attached and Torsion Damper has already been installed, timing belt service is not needed.
Oil Filter, Engine
Engine Oil
Brake Fluid
Rotate
Tires
Check pressure, tread depth and wear pattern.