40000 MI or 64000 KM

Reset
    Service Reminder Indicators
       Service Indicator Reminder Lamp (SIR); 1996 Models must use a Scan Tool to reset SIR
Clean
    Antenna
Check
    Cooling System
      Pressure test cooling system.
    Brakes and Traction Control
      Check thickness of pads & linings, check condition of hoses & lines, check power booster, check parking brake cables & adjust.
Adjust
    Clutch Pedal Assembly
      Clutch Pedal Free Play.
Inspect
    Wiper and Washer Systems
    Universal Joint, Drive/Propeller Shaft
    Steering and Suspension
    Power Steering Fluid
    Lighting and Horns
    Fuel Supply Line
    Fluid - M/T
    Fluid - Differential
    Fluid - A/T
    Exhaust System
    Drive Belt
      1995 940
    Coolant
    Body and Frame
      1992-93; Visually check for corrosion.
    Battery
       Check charge.
    Accessories and Optional Equipment
Replace
    Timing Belt Tensioner
      �1mINSTALL�0m Torsion Damper: 1992 960 B6304F only; Inspect for label on timing cover, if label is attached and Torsion Damper has already been installed, service is not needed. �1mImportant Note:�0m A Torsion Damper on the exhaust camshaft has been introduced on the �1m1993�0m model year 960 with B6304F engine to extend the replacement interval of the timing belt to 30,000 mile intervals. For a �1m1992�0m model year 960 an exhaust camshaft damper will be installed in conjunction with the the timing belt replacement at the 40,000 mile service. If the torsion damper has not been installed it is highly recommended to have one installed which will change the replacement interval from 20,000 miles to a 30,000 mile interval.
    Timing Belt
      �1m1992�0m 960 B6304F only - in combination with installation of camshaft Torsion Damper. Inspect for label on timing cover, if label is attached and Torsion Damper has already been installed, timing belt service is not needed.
    Oil Filter, Engine
    Engine Oil
    Brake Fluid
Rotate
    Tires
      Check pressure, tread depth and wear pattern.