Dealer Vehicle Campaign and ID Labels

DEALER VEHICLE CAMPAIGN LIST



To assist dealers in identifying the specific vehicles which require modification under this campaign and to schedule shop time accordingly, the "Dealer Vehicle Campaign List" is enclosed. This list details all vehicles that have been wholesaled to your dealership within the affected VIN ranges. Each list is sequenced in VIN order, stock vehicles first, followed by retailed vehicles. An identification number has also been included for each vehicle in a column to the right of the VIN.

Areas on the list headed "REP CODE" and RO DATE" are provided so dealers can enter the applicable Repair Order Number and Repair Order Date as each vehicle is modified. Retain this list as a permanent record of the action taken by your dealership for this campaign.

If a list is not enclosed, then according to our records, none of the affected vehicles were wholesaled to your dealership. However, you should be aware of the details of this campaign in the event that you are requested to perform repairs by a transient customer.

STOCK VEHICLES

The "Dealer Vehicle Campaign List" also identifies all vehicles affected by this campaign which, according to our records, are in dealer stock at the time of launch. All stock vehicles must have Campaign 60 completed prior to customer delivery or dealer trade.

NOTE:
IF ANY VEHICLE LISTED IN DEALER STOCK HAS BEEN RETAILED, IT IS THE DEALER'S RESPONSIBILITY TO CONTACT THE OWNER AND ARRANGE FOR THE REPAIRS TO BE COMPLETED.

COMPLETED CAMPAIGN IDENTIFICATION LABELS

Enclosed with this bulletin is a supply of "Campaign Labels." THESE LABELS ARE TO BE USED TO IDENTIFY CAMPAIGN 60 ONLY.





After Campaign 60 has been carried out, complete the label by entering your Dealer Code, and Repair Date (use a ball-point pen); then affix the label to the driver's door as illustrated in the diagram. Should you require additional labels, please contact your Volvo Area office.

Vehicles that have been modified at the Port will be identified by a sticker or a yellow dot on the inside Fuel Tank Filler Door Jam for the Motronic Control Unit and on the Fan Shroud for A/C Switches and Harness completion. Check for the completion label prior to starting work on a car.